pavingexpert in association with NCC Streetscape

Patio Jointing using VDW 800 Epoxy Mortar
On This Page...

NCC Streetscape and GftK mortars
ruler
Related Pages

 
product study This page features a video showing the use of VDW 800 epoxy resin jointing mortar as supplied by NCC Streetscape to a residential patio project in Lancashire, England. The application of the jointing was observed and documented independently by pavingexpert.com during May 2013.
ruler

Introduction

The pros and cons for cement mortars and resin mortars are made elsewhere on the site, and the detailed use of the VDW800 mortar is covered in excruciating detail on the Driveway Jointing page. This page is intended to host the video showing use of the mortar on a residential Indian Sandstone patio. If further installation guidance or more thorough information regarding the mortar itself is required, please refer to that Driveway Jointing page.

Coverage is obviously dependent on joint width, joint depth and the plan size of the paving units used. On this particular project, with flags of the 560mm series and 20-25mm thick, the contractor reports a coverage rate of approximately 12.5m² per pail or 2kg/m².

 ruler

Further Information:

Contact NCC Streetscape:

Web: www.nccstreetscape.co.uk

Tel: +44 (0) 1257 266 696

Email:

PDF

VDW 800 Product Information PDF
Download here

Client: Wickstead Developments
Halsall, Lancashire
Paving Contractor: Wickstead Developments

 ruler

Video:

ruler

Other Product Studies featuring VDW mortars: